Ceramic vessel 30-1-4. Cueva de la Lobera

Ceramic vessel from the third terrace of the Iberian santuary Cueva de la Lobera (Castellar, Jaén, Spain). Oxidising and reducing atmosphere. Decoration with red semicircles on grey background. The red colour is manufactured using hematite (Fe2O3) in high concentration (12.53% wt of Fe according to EDXRF analysis). The use of an extra amount of iron ore to be added to the clay mix used for decoration is proposed.
The grey background is the result of the transformation of hematite in magnetite (Fe3O4) in a reducing atmosphere. EDXFR analysis confirms the presence of Fe (6.17% wt) and the lack of Mn (0.01% wt) in the grey decoration.

New product

Dimensions

: 3.5 Centimeters

: 3.5 Centimeters

Materials

pottery

Temporal

: Iberians, Iberian

: 4th-3rd ct. BC

Spatial

: Cueva de la Lobera

: Castellar, Jaén, Spain

: WGS84

 

Copyrights

Creative Commons - Attribution, Non-Commercial, No Derivatives (BY-NC-ND)

References

Risquez, C., Rueda, C., Nicolini, G. Ruiz, A. Zafra, N. y Esteban, C. (2015): “El Santuario de Cueva de la Lobera de Castellar”, en A. Ruiz y M. Molinos (coord.): Jaén, tierra ibera: 40 años de investigación y transferencia. Universidad de Jaén. 203-218.

Rísquez, C., Rueda, C. y García-Luque, Mª A. (2013): Plan director santuario íbero Cueva de La Lobera (Castellar, Jaén). Universidad de Jaén. Jaén.

Cueva de la Lobera. Altos del Sotillo. Patrimonio inmueble de Andalucía.

Pastwomen

Digital Resources

Activities

Archaeometric analysis

Physical-chemical analysis

Ceramic. Analysis of decoration

University Research Center for Iberian Archaeology

Raman Microscopy

Mineral analysis of the red decoration

Non destructive. Surface cleaning. Sample pretreatment is not required. Direct measurement.

Micro-Raman Spectroscopy (MRS)

Renishaw ‘in via’ Reflex Spectrometer coupled with a confocal Leica DM LM microscope (CICT, University of Jaén), equipped with a diode laser (785 nm, 300 mW), and a Peltier-cooled CCD detector, calibrated to the 520.5 cm-1 line of silicon.

X-Ray Fluorescence

Elemental analysis of the red and grey decoration

Non destructive. Surface cleaning. Sample pretreatment is not required. Direct measurement.

Energy dispersive X- ray fluorescence (EDXRF)

Espectrómetro de fluorescencia de rayos X de energía dispersiva EDAX (modelo Eagle III)( CITI, Universidad de Sevilla). Está equipado con un tubo de rayos X microfocus con un ánodo de Rh, una lente policapilar para enfoque de rayos X y un detector de energía dispersiva Si-(Li) de 80mm2. La cámara de medida incorpora una bandeja motorizada para el posicionamiento de la muestra. Microscopio de alta resolución para posicionar la muestra a la distancia adecuada. Cámara con bomba de vacío para elementos de bajo número atómico (Z). Para un tamaño del área de medida de 300 μm se selecciona en el tubo de rayos X un voltaje de 40kV. La intensidad de corriente del tubo se adapta a cada muestra para optimizar la detección de los rayos X.;

 

10 other products in the same category: